Teledyne 100E Uživatelský manuál Strana 61
- Strana / 86
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
TELEDYNE INSTRUMENTS
Model 100EU Instruction Manual
APPENDIX A - Version Specific Software Documentation
05928 Rev F.0B A-21
DCN 5063 PRINTED DOCUMENTS ARE UNCONTROLLED
APPENDIX A-3: Warnings and Test Functions, Revision F.0B
Table A-2: M100EU Warning Messages, Revision F.0B
Name
1
Message Text Description
WSYSRES SYST EM RESET
Instrument was power-cycled or the CPU
was reset.
WDATAINIT DATA INITIALIZED Data storage was erased.
WCONFIGINIT CONFIG INITIALIZED
Configuration storage was reset to factory
configuration or erased.
WPMT PMT DET WARNING
PMT detector outside of warning limits
specified by DETECTOR_LIMIT variable.
WUVLAMP UV LAMP WARNING
UV lamp reading outside of warning limits
specified by DETECTOR_LIMIT variable.
WSAMPFLOW SAMPLE FLOW WARN
Sample flow outside of warning limits
specified by SAMP_FLOW_SET variable.
WSAMPPRESS SAMPLE PRESS WARN
Sample pressure outside of warning limits
specified by SAMP_PRESS_SET
variable.
WVACPRESS
5
VACUUM PRESS WARN
Vacuum pressure outside of warning limits
specified by VAC_PRESS_SET variable.
WBOXTEMP BOX TEMP WARNING
Chassis temperature outside of warning
limits specified by BOX_SET variable.
WRCELLTEMP RCEL L TEMP WARNING
Reaction cell temperature outside of
warning limits specified by RCELL_SET
variable.
WO2CELLTEMP
10
O2 CELL TEMP WARN
O
2
sensor cell temperature outside of
warning limits specified by O2_CELL_SET
variable.
WIZSTEMP IZS TEMP WARNING
IZS temperature outside of warning limits
specified by IZS_SET variable.
WPMTTEMP PMT TEMP WARNING
PMT temperature outside of warning limits
specified by PMT_SET variable.
WDARKCAL
5
DARK CAL WARNING
Dark offset above limit specified by
DARK_LIMIT variable.
WHVPS HVPS WARNING
High voltage power supply output outside
of warning limits specified by HVPS_SET
variable.
WDYNZERO CANNOT DYN ZERO
Contact closure zero calibration failed
while DYN_ZERO was set to ON.
WDYNSPAN CANNOT DYN SPAN
Contact closure span calibration failed
while DYN_SPAN was set to ON.
WREARBOARD REAR BOARD NOT DET
Rear board was not detected during
power up.
WRELAYBOARD RELAY BOARD WARN
Firmware is unable to communicate with
the relay board.
WFRONTPANEL FRONT PANEL WARN
Firmware is unable to communicate with
the front panel.
WANALOGCAL ANALOG CAL WARNING
The A/D or at least one D/A channel has
not been calibrated.
- MODEL 100EU 1
- TRACE LEVEL SULFUR DIOXIDE 1
- ANALYZER 1
- TABLE OF CONTENTS 3
- LIST OF FIGURES 4
- LIST OF TABLES 4
- 1. PREFACE 5
- WARRANTY 7
- 3. GETTING STARTED 9
- 3.3.1 TEST FUNCTIONS 10
- GETTING STARTED 11
- USER NOTES: 12
- FUNCTIONS 17
- User Notes: 18
- 7. CALIBRATION PROCEDURES 19
- 8. EPA PROTOCOL CALIBRATION 21
- 9. INSTRUMENT MAINTENANCE 23
- 10.1 ELECTRONIC OPERATION 25
- 10.1.1.1 Sample Chamber 26
- THEORY OF OPERATION 27
- (OPTION) 30
- (Peaking the Lamp 32
- Light from Reaction 36
- Chamber shines 36
- FACTORY CAL) 38
- 11.4 TECHNICAL ASSISTANCE 39
- TELEDYNE INSTRUMENTS 41
- (iDAS) 46
- TELEDYNE INSTRUMENTS 53
- Message Text Description 61
- Signal Name Bit or Channel 64
- Description 64
- 05928 Rev F.0B A-29 69
- M100E MODBUS Register Map 69
- (single-bit; read-only) 70
- MODBUS Coil Registers 71
- (single-bit; read/write) 71
- Name Description 72
- Name Description Units 72
- 05929 Rev A B-1 77
- B-2 05929 Rev. A 78
- M100EU Spare Parts List 79
- Model 100EU 81
- *IF OPTION IS INSTALLED 83
- Appendix D – Schematic List 85
- D-2 05931 Rev. A 86
Související produkty a manuály pro Měření, testování a kontrola Teledyne 100E
(324 stránky)
(42 stránky)Great-planes F-20 Tigershark Electric Ducted Fan Rx-R - GPMA601 manuals
Owner’s manuals and user’s guides for Air equipment Great-planes F-20 Tigershark Electric Ducted Fan Rx-R - GPMA601.
We providing 1 pdf manuals Great-planes F-20 Tigershark Electric Ducted Fan Rx-R - GPMA601 for download free by document types: User Manual
Komentáře k této Příručce